Winchester Model 12



Overview


Model 12 Trench gun

Winchester Model 12 pump-action shotgun in use with Iranian airborne troops.
Source: Unknown author - © copyright lies with original owner

Origin
United States
Type
Shotgun
Entered service
1912
Status
Obsolete
Development
Early 1910's
Developer
United States - Thomas Crosley Johnson for Winchester
Production
1912 - 1963
Producer
United States - Winchester
Number produced
Nearly 2 million including civilian sales
Designations
M12, M1912 (service designations)
Perfect Repeater (popular nickname)

Description


Introduction

The Winchester Model 12 is a pump-action shotgun of US origin. The design was based on the Browning M1987 shotgun, but uses an internal hammer. At first it was only available in 20ga, but the 12ga models were the most produced and most prominent in police and military use.

Design

The Model 12 has a standard pump-action design. It differs from earlier shotguns in having an internal hammer and therefore has a smooth receiver. Most components are made of forged and machined steel parts, with the shoulder stock and pump-action handle made out of wood. Military models were often fitted with a heat shield.

Firepower

In military use the Model 12 fires 12ga 2.75 or 3-inch shotgun shells. For civilians the Model 12 was also available in 16, 20 and 28 gauge. The tubular magazine under the barrel holds five 3"shells or six 2.75" shells. As the Models 12 has no trigger disconnector, it fires on every pump action when the trigger is depressed.

Users

The Model 12 was popular in the USA among civilian, law enforcement and the military. It was used in large quantities by US forces in both World War 1 and 2, the Korean War and finally the Vietnam war. As the production was discontinued in the 1960's it was replaced during the Vietnam war by Ithaca and Mossberg shotguns. The Model 12 has also been exported to several US allies.

Details


Variants of the Model 12

Model 12 Trench gun

The Model 12 Trench gun was developed for the US Army. The barrel is much shorter and extends only slightly beyond the tubular magazine, a heat shield is fitted and lugs for the M1917 bayonet are fitted.

Model 12 Riot gun

The Model 12 Riot gun was developed for law enforcement use. It differs from the civilian Model 12 in having a shorter barrel that extends only slightly beyond the tubular magazine. A heat shield over the barrel is optional.

Facts M12 Trench gun M12 Riot gun
General
Origin
United States
Type
Shotgun
Caliber
Caliber
12ga 2.75" and 3"
Feed system
Tubular magazine
6 shells for 2.75"
5 shells for 3"
Barrel length
524 mm
Rifling
Smoothbore
Operation
Action
Pump-action
Fire selector
0 - 1
Rate of fire
Pump-action
Dimensions
Stock type
Fixed
Length
1.017 mm
Weight
3.6 kg empty
Sights
Mechanical
Iron sights, fixed